My new map, working on it
Moderators: TresCom Support Team, TresCom Board Managers, TresCom Developers
My new map, working on it
Just wandering what you guys and gals thought of my wellhead. I might try to lower the poly count if it causes bugs.
I've decided to go with either a jungle airport or a geothermal power plant. This is the wellhead for the plant.
Edit: The first pic uses 8 sides per cylinder. The other two are 16 sides. They look way more realistic.
I've decided to go with either a jungle airport or a geothermal power plant. This is the wellhead for the plant.
Edit: The first pic uses 8 sides per cylinder. The other two are 16 sides. They look way more realistic.
- Attachments
-
- TPass006.jpg (4.39 KiB) Viewed 19295 times
-
- TPass005.jpg (4.5 KiB) Viewed 19296 times
-
- TPass004.jpg (4.74 KiB) Viewed 19296 times
Last edited by Teromen on Tue Aug 01, 2017 12:23 pm, edited 1 time in total.
Re: My new map, working on it
Looks great! New models are always welcome. I bet hppav will be excited to see someone doing a fresh Geothermal Plant. What's the polycount like? 16-sides is probably acceptable. I tend to prefer 8-12, but that's an odd number to use and can require a bit of extra tweaking.
Re: My new map, working on it
After testing it, I like it with 8 per side for a Tres model. I'm watching youtube for how to make a geothermal plant. The hardest part will be the scripting. I gotta find out if it's possible to have steam clouds in Tres. Geothermal plants lets off steam into the air. They can look kind of like those tall towers nuclear plants have, with steam coming out of them.
https://www.youtube.com/watch?v=kjpp2MQffnw
https://www.youtube.com/watch?v=kjpp2MQffnw
- Attachments
-
- TPass007.jpg (6.29 KiB) Viewed 19294 times
- Draconisaurus
- T-Rex Killer
- Posts: 14081
- Joined: Mon Dec 06, 2004 5:21 pm
- Antispam: No
- Location: Isla Sorna
- Contact:
Re: My new map, working on it
Looking good. I support the lower-poly version. Some advice from my JPDS-days, which may or may not be relevant: Don't get caught up on the specialness of individual new models you make. They are very cool and all that but comprise a small portion of the whole which is your target. Save the admiration for later stage and keep pumping new models out, without getting hung up on each as you go...
As for steam: Very possible in Trespasser. Go into TC~Isle (TC Act II) and you'll find a mechanical steam vent of some kind in the cave section. Adjust the scale and/or dimensions of the mesh to suit your geothermal needs.
As for steam: Very possible in Trespasser. Go into TC~Isle (TC Act II) and you'll find a mechanical steam vent of some kind in the cave section. Adjust the scale and/or dimensions of the mesh to suit your geothermal needs.
Re: My new map, working on it
I figured a geothermal plant should have volcano's nearby. Here is a glimpse of the level. The large area near the volcano still needs to be flattened out and I'm gonna add a road. Blurring the outer non playable areas and optimizing it. Other than that its mostly done.
- Attachments
-
- TPass008.jpg (20.07 KiB) Viewed 19263 times
-
- TPass009.jpg (45.06 KiB) Viewed 19263 times
Re: My new map, working on it
That's a cool looking heightmap! I like the craggy cliffs and volcanoes everywhere, kinda reminds me of Isla Nublar.
You sure you don't want to make the playable area a bit larger? It seems kind of silly to have all that unused area...
You sure you don't want to make the playable area a bit larger? It seems kind of silly to have all that unused area...
Re: My new map, working on it
It would take forever to fill with foliage hehe. You can explore one of them b.t.w. Should be neat.
- Draconisaurus
- T-Rex Killer
- Posts: 14081
- Joined: Mon Dec 06, 2004 5:21 pm
- Antispam: No
- Location: Isla Sorna
- Contact:
Re: My new map, working on it
Keep it up... Would be cool if the circular area were raised a bit relative to the surroundings..
Re: My new map, working on it
You mean the big area in the middle?
- Draconisaurus
- T-Rex Killer
- Posts: 14081
- Joined: Mon Dec 06, 2004 5:21 pm
- Antispam: No
- Location: Isla Sorna
- Contact:
Re: My new map, working on it
How should I raise it up? Keep in mind that's where the geothermal plant goes.
- Draconisaurus
- T-Rex Killer
- Posts: 14081
- Joined: Mon Dec 06, 2004 5:21 pm
- Antispam: No
- Location: Isla Sorna
- Contact:
Re: My new map, working on it
Weeellll, easy way in TresEd would be: Go to Terrain Edit mode... Select a point in the center of the area to be raised. Then set a LARGE "Radius", 200 or whatever... Make it the size of whatever the caldera/cross-circumference would be, then use the Area tool and raise it upward. Use whatever Feather value gives an appropriate gradual rise to the surrounding terrain.
Re: My new map, working on it
Thanks but I mean how should the style be? I'll try something and post a screenshot. So far I do most of my terrain editing in the Unreal development kit.
I create heightmaps in Bryce, blend them together in Photoshop. Modify them in World Machine, edit them in UDK(where I do most of the editing). The image is exported from UDK and then converted to a tif image with Height Map Conversion Software(handy program). Create a displacement model with a 16 bit heightmap in 3dsmax, export to trr format, then the rest in guiapp.
I create heightmaps in Bryce, blend them together in Photoshop. Modify them in World Machine, edit them in UDK(where I do most of the editing). The image is exported from UDK and then converted to a tif image with Height Map Conversion Software(handy program). Create a displacement model with a 16 bit heightmap in 3dsmax, export to trr format, then the rest in guiapp.
Re: My new map, working on it
Here are a couple screenshots of the center. It is already raised a bit but a can raise it more. I'm gonna study some jungle images for ideas before I edit it.
Edit: Sorry to double post. Won't happen again.
Edit: Sorry to double post. Won't happen again.
- Attachments
-
- TPass0010.jpg (221.58 KiB) Viewed 19183 times
-
- TPass0011.jpg (238.04 KiB) Viewed 19183 times
- Draconisaurus
- T-Rex Killer
- Posts: 14081
- Joined: Mon Dec 06, 2004 5:21 pm
- Antispam: No
- Location: Isla Sorna
- Contact:
Re: My new map, working on it
Nice-looking terrain going... How should the style be? Not quite a question I understand.